~~NOTOC~~
|<100% 25% - >|
^  \\ 3D PRINTING AND DESIGN REFERENCE DOCUMENT\\ \\   ^^
^  Document Title:|Document Title|
^  Document No.:|1764695602|
^  Author(s):|jattie|
^  Contributor(s):|  |



**REVISION HISTORY**
|< 100% 10% - - 10% 17% 10% >|
^  \\  Revision\\  \\  ^\\ Details of Modification(s)^\\ Reason for modification^  \\ Date  ^  \\ By  ^
|  [[:doku.php?id=04_projects:06_voron_24&do=revisions|0]]  |Draft release|Document description here|  2025/12/02 17:13  |  jattie  |


----

====== Voron 2.4 Build ======

This section facilitates research of information for a building a Voron 2.4.((https://www.vorondesign.com/))


===== Building the frame =====

The Voron publications default model is for a 246mm build plate and surprisingly not publishing scaled models and the 3D model is not parametric or scaling either. 

{{ :04_projects:voron:screenshot_2025-12-15_125504.png?direct |}}

^Part^Dimension^Quantity^
|20 x 20 Aluminium Profile|  370mm  |  10  |
|20 x 20 Aluminium Profile|  430mm  |  4  |
|Lineaer Rails            | 9 x 300mm | 4  |

In order to Facilitate a 350mm build this needs to be scaled. This is not a problem when buying kits, however building from raw materials needs to dimensional details. 



  * 4 × 530 mm (drilled) → The vertical uprights. They set the printer’s height and must be drilled for blind joints.
  * 10 × 470 mm (tapped) → The horizontal frame members (top and bottom squares, plus gantry supports). These are tapped to accept fasteners.

===== Building The Gantry =====

{{ :04_projects:voron:screenshot_2025-12-16_162841.png?direct |}}

  * 2 × 450 mm → The gantry extrusions that carry the XY motion system.
  * 1 × 430 mm → The rear crossmember that supports the Z drives and belts.
  * 1 × 340 mm → The front crossmember that supports the front idlers and closes the frame


|530|4|2,120|
|470|10|4,700|
^SUBTOTAL|^6,820|

|450|2|900|
|430|1|430|
|340|1|340|
^SUBTOTAL|^1,670|
^TOTAL|^8,490|

^Material^Unit Price^Total^
|[[https://www.flomax.ie/catalogue/sku.aspx?node_id=621ebcfc-cf63-4bb7-a358-87e024c1ac42|Flowmax 20 x 20 Profile x 3m]]|34.42|  3  |€103.24|




===== West3D Voron V2.4 Self-Source Configurator =====


^Build Size: 350mm | €131.13|
^Frame: Space Grey (W/ Angle Brackets) | €13.11|
^Printed Parts: No Printed Parts|
^Fasteners: BDF Stainless Steel|
^Motion: POWGE Motion Silver | €43.71|
^Rails: Berserker Rails - Medium Preload | €43.71|
^Ready to Roll Add-on: No - I'll do that myself|
^XY Endstop: XY PCB|
^Z Endstop: Z PCB|
^Probe: CNC Tap Kit | €30.60|
^SSR: |Panasonic AQA211VL 15A SSR|
^Motors: LDO V2.4 Motor Kit | €26.23|
^Controller Board: Manta M8P (With CB2) | €52.45|
^Display: BTT PiTFT 5" Touch Display | €43.71|
^Stepper Drivers: TMC2226 | €8.74|
^Power Supply:| LRS-200-24 (24v)|
^Extruder Components: Galileo 2 (G2E) | €26.23|
^Wiring Harness: V2.4 / Trident Wiring Harness|
^Cable Chains: Standard Cable Chains|
^Bed Heater: West3D Performance Edge to Edge | €13.11|
^Aluminium Build Plate: Voron 2.4 MIC6 Build Plate|
^Flex Plate: Energetic Doubled Sided Smooth/Texture (350) | €13.11|
^Build Plate Magnet: Standard|
^Toolhead: Stealthburner|
^Toolhead PCB: Nitehawk Stealthburner | €24.48|
^Hot End: Rapido PT1000 HF | €8.74|
^Power Inlet / Rocker Switch: Tyco Filtered Inlet + ZF Rocker|
^Fans: Premium Option (Delta Blower) | €8.74|
^Side + Door Panels (Acrylic or ACM): Smoked | €4.37|
^Back/Deck/Bottom Panels (ABS): Black|
^Titanium Backers w/ Ti Screws: Standard|
^Printed High-Temp HTN Nylon Ducts: Not Needed|
^Kinematics Kit: Yes - Titanium | €52.45|