Differences

This shows you the differences between two versions of the page.

--- 04_projects:06_voron_24 [2025/12/02 17:17] – [West3D Voron V2.4 Self-Source Configurator] jattie
+++ 04_projects:06_voron_24 [2025/12/16 16:29] (current) – [Building The Gantry] jattie
@@ Line 17: / Line 17: @@
 ----
-====== West3D Voron V2.4 Self-Source Configurator ======
+====== Voron 2.4 Build ======
+This section facilitates research of information for a building a Voron 2.4.((https://www.vorondesign.com/))
+===== Building the frame =====
+The Voron publications default model is for a 246mm build plate and surprisingly not publishing scaled models and the 3D model is not parametric or scaling either.
+{{ :04_projects:voron:screenshot_2025-12-15_125504.png?direct |}}
+^Part^Dimension^Quantity^
+|20 x 20 Aluminium Profile|  370mm  |  10  |
+|20 x 20 Aluminium Profile|  430mm  |  4  |
+|Lineaer Rails            | 9 x 300mm | 4  |
+In order to Facilitate a 350mm build this needs to be scaled. This is not a problem when buying kits, however building from raw materials needs to dimensional details.
+  * 4 × 530 mm (drilled) → The vertical uprights. They set the printer’s height and must be drilled for blind joints.
+  * 10 × 470 mm (tapped) → The horizontal frame members (top and bottom squares, plus gantry supports). These are tapped to accept fasteners.
+===== Building The Gantry =====
+{{ :04_projects:voron:screenshot_2025-12-16_162841.png?direct |}}
+  * 2 × 450 mm → The gantry extrusions that carry the XY motion system.
+  * 1 × 430 mm → The rear crossmember that supports the Z drives and belts.
+  * 1 × 340 mm → The front crossmember that supports the front idlers and closes the frame
+|530|4|2,120|
+|470|10|4,700|
+^SUBTOTAL|^6,820|
+|450|2|900|
+|430|1|430|
+|340|1|340|
+^SUBTOTAL|^1,670|
+^TOTAL|^8,490|
+^Material^Unit Price^Total^
+|[[https://www.flomax.ie/catalogue/sku.aspx?node_id=621ebcfc-cf63-4bb7-a358-87e024c1ac42|Flowmax 20 x 20 Profile x 3m]]|34.42|  3  |€103.24|
+===== West3D Voron V2.4 Self-Source Configurator =====