Differences

This shows you the differences between two versions of the page.

--- 04_projects:06_voron_24 [2025/12/02 17:14] – created jattie
+++ 04_projects:06_voron_24 [2025/12/16 16:29] (current) – [Building The Gantry] jattie
@@ Line 17: / Line 17: @@
 ----
-====== West3D Voron V2.4 Self-Source Configurator ======
+====== Voron 2.4 Build ======
+This section facilitates research of information for a building a Voron 2.4.((https://www.vorondesign.com/))
-Build Size: 350mm | €131.13
-Frame: Space Grey (W/ Angle Brackets) | €13.11
+===== Building the frame =====
-Printed Parts: No Printed Parts
-Fasteners: BDF Stainless Steel
+The Voron publications default model is for a 246mm build plate and surprisingly not publishing scaled models and the 3D model is not parametric or scaling either.
-Motion: POWGE Motion Silver | €43.71
-Rails: Berserker Rails - Medium Preload | €43.71
+{{ :04_projects:voron:screenshot_2025-12-15_125504.png?direct |}}
-Ready to Roll Add-on: No - I'll do that myself
-XY Endstop: XY PCB
+^Part^Dimension^Quantity^
-Z Endstop: Z PCB
+|20 x 20 Aluminium Profile|  370mm  |  10  |
-Probe: CNC Tap Kit | €30.60
+|20 x 20 Aluminium Profile|  430mm  |  4  |
-SSR: Panasonic AQA211VL 15A SSR
+|Lineaer Rails            | 9 x 300mm | 4  |
-Motors: LDO V2.4 Motor Kit | €26.23
-Controller Board: Manta M8P (With CB2) | €52.45
+In order to Facilitate a 350mm build this needs to be scaled. This is not a problem when buying kits, however building from raw materials needs to dimensional details.
-Display: BTT PiTFT 5" Touch Display | €43.71
-Stepper Drivers: TMC2226 | €8.74
-Power Supply: LRS-200-24 (24v)
-Extruder Components: Galileo 2 (G2E) | €26.23
+  * 4 × 530 mm (drilled) → The vertical uprights. They set the printer’s height and must be drilled for blind joints.
-Wiring Harness: V2.4 / Trident Wiring Harness
+  * 10 × 470 mm (tapped) → The horizontal frame members (top and bottom squares, plus gantry supports). These are tapped to accept fasteners.
-Cable Chains: Standard Cable Chains
-Bed Heater: West3D Performance Edge to Edge | €13.11
+===== Building The Gantry =====
-Aluminium Build Plate: Voron 2.4 MIC6 Build Plate
-Flex Plate: Energetic Doubled Sided Smooth/Texture (350) | €13.11
+{{ :04_projects:voron:screenshot_2025-12-16_162841.png?direct |}}
-Build Plate Magnet: Standard
-Toolhead: Stealthburner
+  * 2 × 450 mm → The gantry extrusions that carry the XY motion system.
-Toolhead PCB: Nitehawk Stealthburner | €24.48
+  * 1 × 430 mm → The rear crossmember that supports the Z drives and belts.
-Hot End: Rapido PT1000 HF | €8.74
+  * 1 × 340 mm → The front crossmember that supports the front idlers and closes the frame
-Power Inlet / Rocker Switch: Tyco Filtered Inlet + ZF Rocker
-Fans: Premium Option (Delta Blower) | €8.74
-Side + Door Panels (Acrylic or ACM): Smoked | €4.37
+|530|4|2,120|
-Back/Deck/Bottom Panels (ABS): Black
+|470|10|4,700|
-Titanium Backers w/ Ti Screws: Standard
+^SUBTOTAL|^6,820|
-Printed High-Temp HTN Nylon Ducts: Not Needed
-Kinematics Kit: Yes - Titanium | €52.45
+|450|2|900|
+|430|1|430|
+|340|1|340|
+^SUBTOTAL|^1,670|
+^TOTAL|^8,490|
+^Material^Unit Price^Total^
+|[[https://www.flomax.ie/catalogue/sku.aspx?node_id=621ebcfc-cf63-4bb7-a358-87e024c1ac42|Flowmax 20 x 20 Profile x 3m]]|34.42|  3  |€103.24|
+===== West3D Voron V2.4 Self-Source Configurator =====
+^Build Size: 350mm | €131.13|
+^Frame: Space Grey (W/ Angle Brackets) | €13.11|
+^Printed Parts: No Printed Parts|
+^Fasteners: BDF Stainless Steel|
+^Motion: POWGE Motion Silver | €43.71|
+^Rails: Berserker Rails - Medium Preload | €43.71|
+^Ready to Roll Add-on: No - I'll do that myself|
+^XY Endstop: XY PCB|
+^Z Endstop: Z PCB|
+^Probe: CNC Tap Kit | €30.60|
+^SSR: |Panasonic AQA211VL 15A SSR|
+^Motors: LDO V2.4 Motor Kit | €26.23|
+^Controller Board: Manta M8P (With CB2) | €52.45|
+^Display: BTT PiTFT 5" Touch Display | €43.71|
+^Stepper Drivers: TMC2226 | €8.74|
+^Power Supply:| LRS-200-24 (24v)|
+^Extruder Components: Galileo 2 (G2E) | €26.23|
+^Wiring Harness: V2.4 / Trident Wiring Harness|
+^Cable Chains: Standard Cable Chains|
+^Bed Heater: West3D Performance Edge to Edge | €13.11|
+^Aluminium Build Plate: Voron 2.4 MIC6 Build Plate|
+^Flex Plate: Energetic Doubled Sided Smooth/Texture (350) | €13.11|
+^Build Plate Magnet: Standard|
+^Toolhead: Stealthburner|
+^Toolhead PCB: Nitehawk Stealthburner | €24.48|
+^Hot End: Rapido PT1000 HF | €8.74|
+^Power Inlet / Rocker Switch: Tyco Filtered Inlet + ZF Rocker|
+^Fans: Premium Option (Delta Blower) | €8.74|
+^Side + Door Panels (Acrylic or ACM): Smoked | €4.37|
+^Back/Deck/Bottom Panels (ABS): Black|
+^Titanium Backers w/ Ti Screws: Standard|
+^Printed High-Temp HTN Nylon Ducts: Not Needed|
+^Kinematics Kit: Yes - Titanium | €52.45|